Especially Roofing
Flat Roofs by Especially Roofing
5 Star Rated on Checkatrade

Flat Roofs in Bridlington

Replace the flat roof over your dormer, extension or garage with a system suited to coastal weather.

  • Felt, EPDM rubber or GRP
  • Insulated warm roof option
  • Roof lanterns fitted

Get a quote for flat roofs in Bridlington

Fill out the form below, and we will get back to you swiftly.

Step 1 of 2

Flat Roofs in Bridlington

Choosing a flat roof system that stands up to the sea wind

A flat roof tends to show its age in the same few ways: felt that has blistered or cracked, an edge trim working loose, or water sitting in a puddle long after the rain has passed. Once those appear, patching rarely holds for long. Your new roof starts at the deck: soft boards are swapped out and the falls are set so rain runs to the outlet. If there is enough height at walls, sills and door thresholds, a warm roof build can add insulation over the deck.

Three coverings are on offer. Torch-on felt, built up in layers with a mineral cap sheet, is normally the lowest-cost choice. EPDM rubber, laid by us as certified RubberCover installers, is one flexible sheet with hardly any seams, which suits plain shapes. GRP fibreglass, laid as approved Cure It installers, is laminated in place and sets into a hard surface that takes foot traffic. We explain the trade-offs for your roof, and as VELUX-approved installers can add a lantern or skylight.

Flat Roofs project completed by Especially Roofing
Bridlington

Flat roofs on Bridlington's terraces, seafront buildings and estates

Flat roofs turn up all over the town. On terraced streets they often cover rear additions and kitchen extensions, while on taller seafront and guest house buildings they can sit over dormers and back offshoots, out of sight from the street. On those exposed roofs, the edges matter most. Wind off the sea gets under a loose trim or an unbonded edge and can peel the covering back, so trims, upstands and drip details are fixed and sealed with care.

On the newer estates at the edges of Bridlington, the flat roof is usually over a garage, porch or single-storey extension, and simple shapes like these are well suited to EPDM rubber. GRP is the better match where you want to walk on the roof, perhaps to reach a window or a balcony. Salt air is hard on metal, so it is worth looking at any old metal flashings or edge details while the roof is open. Larger flat roofs on commercial buildings follow the same survey and quote.

What your flat roof quote covers

  • Strip-off of the old covering and waste removal
  • Decking checked and replaced where rotten
  • Warm roof insulation option where it fits
  • Falls set towards outlets and guttering
  • New edge trims, upstands and drip details
  • Roof lantern or VELUX skylight fitting
Drone view over a row of finished roofs on a Hull street
Especially Roofing inspection drone beside pallets of new roof tiles
Grey tiled hipped roof seen from above after replacement
Free Drone Inspections

See your roof from above before you decide

Most roof problems cannot be seen from the garden. Our drone survey gives you clear pictures of the tiles, ridge, valleys, chimney and guttering, so you can see the damage we are talking about and understand why the work is needed.

It is free and there is no obligation. If the roof is sound, we will tell you so. If it needs work, the images sit alongside your written quote, and they are useful if you are making an insurance claim for storm damage.

How It Works

How your flat roof job runs, step by step

Why Choose Us

Why choose Especially Roofing for flat roofs in Bridlington?

Rated 10/10 on Checkatrade

What our customers say

Reviews from homeowners and businesses we have worked for around Hull.

FAQs

Flat roof in Bridlington: your questions

Will a flat roof stay put in strong coastal wind?

A well detailed one should. Most wind damage to flat roofs starts at the edges, where a loose trim lets the wind get underneath. EPDM rubber is bonded to the deck and GRP is laminated in place, which leaves little for the wind to lift, and torch-on felt is fully bonded too. Trims, upstands and drip details are fixed and sealed so the edges stay down through the winter gales.

Which system suits a dormer on a tall seafront building?

Dormer roofs are often small, high up and awkward to reach, so a covering with few joins and little upkeep tends to make sense. EPDM rubber suits a simple dormer shape, while GRP suits one with more detailing, or where someone may need to stand on it. Scaffolding is usually needed either way, so it is costed on the written quote alongside the covering itself.

Can the flat roof on my extension be insulated?

Often, yes. In a warm roof, insulation boards are laid over the deck and under the waterproof layer, so the room underneath holds its warmth better and the timbers stay drier. The roof ends up a little higher, so what limits it is the height available at the wall, door thresholds and window sills above. Those are checked during the survey, and you are told whether it will fit.

My garage roof is ponding after rain. What does that mean?

Standing water that lingers for days usually means the deck has sagged or the falls were never right, so the water has nowhere to go. Ponding speeds up wear on any covering, and it shows first as blisters and cracks around the puddle. A new roof fixes the cause from below, with soft boards replaced and firring pieces set to give a proper fall to the outlet.

How long do flat roofs last?

Torch-on felt generally gives a shorter working life than EPDM rubber or GRP fibreglass, and drainage matters as much as material: ponding water and a soft deck shorten the life of any covering. On an exposed roof by the sea, the edges and upstands take a lot of punishment, so keeping those sound is as important as the system you choose.

What are flat roofs made of?

Most start with timber joists carrying a boarded deck, and in a warm roof build, rigid insulation goes on top of those boards. The waterproof layer is one of three: layered torch-on felt, a one-piece EPDM rubber membrane, or GRP fibreglass, laid as resin and matting that sets hard. Trims, upstands and drip edges finish the roof. On older terraces, felt laid straight onto the boards is common.

Do solar panels work on flat roofs?

Yes, as a rule. On a flat roof, panels usually sit on frames angled towards the sun, and by the sea those frames need fixing to resist the wind as well as to hold the panels. The roof beneath must be in good condition, strong enough for the added load and with plenty of life left. If yours is tired, renewing it before whoever fits the panels starts saves lifting them off later.
Get In Touch

Can’t find the answer you’re looking for?

Get in touch with the team today.

Call NowGet Your Quote