Especially Roofing
Flat Roofs by Especially Roofing
5 Star Rated on Checkatrade

Flat Roofs in Grimsby

Replace the tired flat roof on your Grimsby extension, garage or back addition with one suited to its use.

  • Torch-on felt or EPDM
  • GRP fibreglass laid
  • Warm roof where it fits

Get a quote for flat roofs in Grimsby

Fill out the form below, and we will get back to you swiftly.

Step 1 of 2

Flat Roofs in Grimsby

Picking a flat roof system for your extension or garage

A flat roof that ponds, blisters or leaks at the edges has usually reached the point where patching will not hold for long. We strip the old covering, check the deck and replace any boards that have gone soft, then build the falls so water runs off to the gutter or outlet. Getting the base right matters as much as the covering, because a new membrane laid over rotten boards will not last.

You choose between three systems. Torch-on felt is the economical option for a straightforward roof. EPDM rubber, which we lay as a certified RubberCover installer, covers the roof in a single sheet. GRP fibreglass, fitted as an approved Cure It installer, sets hard and suits roofs you want to walk on. Where heights allow, a warm roof build adds insulation above the deck, and roof lanterns or VELUX skylights can go in at the same time.

Flat Roofs project completed by Especially Roofing
Grimsby

Flat roofs on Grimsby back additions, garages and extensions

Behind some of Grimsby's terraced houses, the outrigger or a later addition built onto it has a flat roof over a kitchen or bathroom. These roofs are small, but they often meet the main wall, a soil pipe and a window in a tight space, so the detailing around upstands and edges does most of the work. GRP or EPDM can suit these awkward shapes well, and we talk you through the choice once we have seen the roof.

On the twentieth-century estates around the town, flat roofs more often sit over garages, porches and single-storey extensions. Because Grimsby is exposed to wind off the estuary and the sea, the roof edges deserve particular care: a lifted trim or a loose edge lets wind get under the covering and peel it back. We fit new edge trims and drip details with every replacement, and set the falls so rain clears quickly instead of sitting.

What your flat roof quote covers

  • Strip-off of the old covering and waste removal
  • Decking checked and replaced where rotten
  • Warm roof insulation option where it fits
  • Falls set towards outlets and guttering
  • New edge trims, upstands and drip details
  • Roof lantern or VELUX skylight fitting
Drone view over a row of finished roofs on a Hull street
Especially Roofing inspection drone beside pallets of new roof tiles
Grey tiled hipped roof seen from above after replacement
Free Drone Inspections

See your roof from above before you decide

Most roof problems cannot be seen from the garden. Our drone survey gives you clear pictures of the tiles, ridge, valleys, chimney and guttering, so you can see the damage we are talking about and understand why the work is needed.

It is free and there is no obligation. If the roof is sound, we will tell you so. If it needs work, the images sit alongside your written quote, and they are useful if you are making an insurance claim for storm damage.

How It Works

How your flat roof job runs, step by step

Why Choose Us

Why choose Especially Roofing for flat roofs in Grimsby?

Rated 10/10 on Checkatrade

What our customers say

Reviews from homeowners and businesses we have worked for around Hull.

FAQs

Flat roof in Grimsby: your questions

Which flat roof system suits a small roof at the back of a Grimsby terrace?

Small rear roofs tend to have lots of upstands, pipes and corners in a tight space. GRP fibreglass is laminated in place with no joins, which handles that detailing well, while EPDM rubber suits simpler shapes as a single sheet. Torch-on felt remains the economical option. We recommend a system once we have seen your roof, not before.

Can wind off the sea damage a flat roof?

It can, especially at the edges. If a trim has come loose or the covering is not properly bonded, wind coming in off the estuary and the sea can get underneath and lift it. That is why we pay close attention to edge trims, upstands and drip details on every flat roof we replace, and check them on the drone images first.

Can you insulate my flat-roofed garage or extension at the same time?

Often, yes. A warm roof build puts insulation boards above the deck and under the new covering, which helps keep the room beneath at a more even temperature. It raises the roof level slightly, so it depends on the height available at walls, doors and window heads. We check that during the survey and tell you whether it will fit.

Can I have a roof lantern in my new flat roof?

Yes. We are a VELUX-approved installer and fit skylights and roof lanterns while the flat roof is being replaced, which is the easiest point to add one. It can make a real difference to a kitchen in a rear extension, where daylight is often limited. The lantern is priced on your written quote with the rest of the work.

How long do flat roofs last?

Rubber and fibreglass usually outlast felt, but drainage, decking and workmanship decide how close any roof gets to its potential. In Grimsby, wind off the estuary and sea can work at a loose edge or upstand, letting water in long before the covering itself has worn. A new flat roof with secure trims, sound decking and good falls stands the best chance of a long life.

What are flat roofs made of?

The base is a timber deck on joists, sometimes insulated above in a warm roof. On top we lay one of three coverings: torch-on felt with a mineral cap sheet, EPDM rubber in a single sheet with very few joins, or GRP fibreglass laminated in place. The small flat roofs on the outriggers of Grimsby terraces often suit a jointless finish around their junctions.

Do solar panels work on flat roofs?

Yes. On a flat roof, panels sit on mounting frames angled towards the sun. In a town exposed to wind off the estuary and the sea, the way the frames are held down matters, and the roof beneath needs to be sound and able to carry the weight. If your Grimsby flat roof is worn, replacing it first avoids moving the panels to re-roof later.
Get In Touch

Can’t find the answer you’re looking for?

Get in touch with the team today.

Call NowGet Your Quote