Especially Roofing
Flat Roofs by Especially Roofing
5 Star Rated on Checkatrade

Flat Roofs in Hornsea

A replacement flat roof for your Hornsea extension, garage or dormer, with trims and upstands built for coastal wind.

  • Felt, EPDM or GRP
  • Edges secured for wind
  • Roof lanterns fitted

Get a quote for flat roofs in Hornsea

Fill out the form below, and we will get back to you swiftly.

Step 1 of 2

Flat Roofs in Hornsea

Flat roofs on an exposed coast often fail at the edges first

A flat roof has no slope to shed water and wind quickly, so its weak points are the edges, upstands and joins. On an exposed coast, wind can get under a lifting trim and peel the covering back, while rain driven against an upstand finds any gap where it meets the wall. That is why a flat roof in Hornsea that has started to blister or lift at the edges is worth looking at before the next stormy spell.

Torch-on felt is the budget-friendly choice for a plain roof. EPDM rubber arrives as a single sheet, so there are very few seams for wind or water to open, and we are certified RubberCover installers. GRP fibreglass, which we lay as approved Cure It installers, hardens into one jointless skin you can walk on. In each case the old covering comes off first, soft decking is replaced, and falls are built in so water runs off rather than sitting.

Flat Roofs project completed by Especially Roofing
Hornsea

Flat roofs on Hornsea extensions, garages and bungalows

Flat roofs can sit over extensions, garages, porches and dormers on every age of house in Hornsea, and many older felt roofs have taken years of weather off the sea. Edge trims are the part we look at most closely on an exposed coast, because a trim that has come loose lets wind under the covering. On a replacement, new trims, drip details and upstands are fixed and dressed so the edge holds firm when the wind picks up.

Where a bungalow has been extended with a flat roof, the junction between the new roof and the existing wall or pitched roof is a common place for water to get in. We dress the new covering up into that junction and renew the flashing above it where needed. Replacing the roof is also the time to add warm roof insulation, if the height at doors and windows allows, or to fit a roof lantern or VELUX skylight, as we are an approved installer.

What your flat roof quote covers

  • Strip-off of the old covering and waste removal
  • Decking checked and replaced where rotten
  • Warm roof insulation option where it fits
  • Falls set towards outlets and guttering
  • New edge trims, upstands and drip details
  • Roof lantern or VELUX skylight fitting
Drone view over a row of finished roofs on a Hull street
Especially Roofing inspection drone beside pallets of new roof tiles
Grey tiled hipped roof seen from above after replacement
Free Drone Inspections

See your roof from above before you decide

Most roof problems cannot be seen from the garden. Our drone survey gives you clear pictures of the tiles, ridge, valleys, chimney and guttering, so you can see the damage we are talking about and understand why the work is needed.

It is free and there is no obligation. If the roof is sound, we will tell you so. If it needs work, the images sit alongside your written quote, and they are useful if you are making an insurance claim for storm damage.

How It Works

How your flat roof job runs, step by step

Why Choose Us

Why choose Especially Roofing for flat roofs in Hornsea?

Rated 10/10 on Checkatrade

What our customers say

Reviews from homeowners and businesses we have worked for around Hull.

FAQs

Flat roof in Hornsea: your questions

Will a new flat roof stand up to the wind in Hornsea?

A flat roof that is fully bonded or fixed across its whole area, with secure edge trims and upstands, copes well with strong wind. Failures on exposed roofs tend to start where an edge has come loose. On every replacement we fit new trims and dress the covering into the upstands, and we choose the system with your roof's exposure in mind.

Which system suits a flat-roofed extension?

It depends on the roof's size, shape and use. Torch-on felt suits a straightforward roof where budget matters most. EPDM rubber works well on simpler shapes, going down as one sheet with few joins. GRP fibreglass suits a roof with plenty of detailing or one you will walk on. We set out the trade-offs for your roof on the quote.

My flat roof holds puddles after rain. Does it need replacing?

Standing water usually means the deck has sagged or the falls were never right, and water that sits for days shortens the life of any covering. A small dip can sometimes be dealt with locally. If the deck has gone soft, a replacement with new boards and firring pieces to set proper falls is the lasting answer. The drone survey shows where the water collects.

Do you charge for the flat roof survey?

No. The drone survey is free, and so is the written quote that follows. The drone goes over the roof first, and then we check the deck, edges and outlets in person. The quote lists the system, the scope of work and any guarantee, and there is no obligation to go ahead.

How long do flat roofs last?

A flat roof's life depends on the material, the quality of the laying and its exposure. Rubber and fibreglass tend to last longer than felt, and all three last longer when the falls keep water moving. In Hornsea, the wind off the sea tests edges and trims, so a roof with well-fixed edges and sound upstands will reach its full life far more often than one left with loose details.

What are flat roofs made of?

A flat roof is built in layers: joists, a timber deck, optional insulation for a warm roof, then the waterproof covering. We lay torch-on felt, EPDM rubber as certified RubberCover installers, or GRP fibreglass as approved Cure It installers. Edge trims and upstands seal it at the walls and gutters. On a Hornsea bungalow extension, we choose the system with you based on size, shape and use.

Do solar panels work on flat roofs?

They can, and a flat roof gives freedom to angle panels towards the sun on a mounting frame. Before panels go on a Hornsea roof, it is worth making sure the covering is sound, the deck can take the load, and the frames are held down in a way that copes with wind off the sea. Replacing a worn flat roof first saves removing the panels later.
Get In Touch

Can’t find the answer you’re looking for?

Get in touch with the team today.

Call NowGet Your Quote