Especially Roofing
Damp Proofing by Especially Roofing
5 Star Rated on Checkatrade

Damp Proofing in Barton-upon-Humber

We find the leak or overflow feeding your damp patch and repair it, before anyone touches the plaster.

  • Causes traced by drone
  • Stacks and flashings
  • General damp work too

Get a quote for damp proofing in Barton-upon-Humber

Fill out the form below, and we will get back to you swiftly.

Step 1 of 2

Damp Proofing in Barton-upon-Humber

Stop the water first, then deal with the damp it left

Damp on a ceiling or high on a wall is often fed from outside, and the source is often some way from the stain. Water can run along a rafter or down inside a chimney breast before it shows. Treating or repainting the plaster without stopping that water simply means the mark returns after the next wet spell. So we work backwards, from the patch you can see to the point where rain is getting in.

The drone gives us a close view of chimney stacks, flashings, valleys and guttering, and a look in the loft shows wet timber or staining that narrows things down. The usual culprits are cracked lead, missing flaunching on top of a stack, a blocked or leaking gutter, or a slipped tile. We repair the cause itself. We also take on general damp proofing, and where the source sits outside what we can fix, we say so plainly.

Damp Proofing project completed by Especially Roofing
Barton-upon-Humber

Why damp shows up in Barton's older brick houses

The Georgian and Victorian houses in Barton's old centre were usually built with a chimney stack for each fireplace, and a stack is one of the most exposed parts of any roof. Flaunching, the mortar cap around the pots, cracks with age, and the lead where the stack meets the roof can split or pull out of its joint. Either lets water into the stack, and it tends to show as a damp patch on a chimney breast in an upstairs room.

Not all damp in an older house comes from above. Damp low on ground-floor walls has different causes, and we take on general damp proofing work for those too. What we will not do is sell a treatment for one cause while another keeps feeding the wall. In older Barton houses it is not unusual to find two sources working together, such as a cracked flashing and a blocked gutter, and each is set out separately on your written quote.

What your damp proofing quote covers

  • Drone inspection of roof, stack and roofline
  • Loft check for staining and wet timber
  • Tracing the likely route of the water
  • Flashing, flaunching and chimney repairs
  • Guttering and downpipe repairs or clearing
  • General damp proofing work where suitable
Drone view over a row of finished roofs on a Hull street
Especially Roofing inspection drone beside pallets of new roof tiles
Grey tiled hipped roof seen from above after replacement
Free Drone Inspections

See your roof from above before you decide

Most roof problems cannot be seen from the garden. Our drone survey gives you clear pictures of the tiles, ridge, valleys, chimney and guttering, so you can see the damage we are talking about and understand why the work is needed.

It is free and there is no obligation. If the roof is sound, we will tell you so. If it needs work, the images sit alongside your written quote, and they are useful if you are making an insurance claim for storm damage.

How It Works

How your damp proofing job runs, step by step

Why Choose Us

Why choose Especially Roofing for damp proofing in Barton-upon-Humber?

Rated 10/10 on Checkatrade

What our customers say

Reviews from homeowners and businesses we have worked for around Hull.

FAQs

Damp proofing in Barton-upon-Humber: your questions

Why is there a damp patch on my chimney breast upstairs?

The most likely causes are cracked flaunching around the pots, split or lifted lead where the stack meets the roof, or rain soaking into worn brickwork on the stack itself. We look at the stack closely with the drone and check the loft for wet timber or staining, then repair whichever has failed, so water stops reaching the breast.

My chimney is no longer used. Could it still be causing damp?

It can. A disused stack still has flaunching, pointing and lead that weather like any other, and rain can get down an open pot into the flue. Because no fire dries the breast out, damp can build up unnoticed for a long time. We inspect the stack the same way as a working one and quote for whatever repair it needs.

Do you only deal with damp that comes from the roof?

No. We trace roof and roofline causes first, because that is where most damp on upper walls and ceilings comes from, but we also take on general damp proofing work. Where we can see that a cause sits outside what we can put right, we tell you plainly instead of offering a treatment that will not address it.

How long will the wall take to dry once the cause is fixed?

Often weeks rather than days, and longer on the thick brick walls of an older house. It depends on how wet the wall became and on the weather while it dries. We advise on when replastering or redecorating is worth doing, because work done too early on a wall that is still damp tends to mark again.

How much does damp proofing cost?

It depends on where the water is coming from. On an older Barton house, an unused chimney with cracked flaunching and tired lead needs scaffolding and more materials, while damp under a blocked gutter is a smaller job. Where a pantile roof with no felt is letting water through, that is priced as a roof repair. Each cause is set out on your written quote.

What is damp proofing?

Damp proofing is the work that stops water getting into a building's walls, ceilings and floors. The three common types are penetrating damp, where rain gets in from outside, rising damp from the ground, and condensation from inside. Barton's Georgian and Victorian houses, with their chimney stacks and older roofs, are prone to penetrating damp, so that is the first thing we check.

How long does damp proofing last?

Repairing the cause means the damp should not come back from that source for as long as the repair holds. Lead flashings, flaunching and new guttering last well when maintained. On a period house in Barton, where several old details may be ageing at once, it is worth having the roof looked over every few years so the next one is caught early.

How does damp proofing work?

It works by tracing the water back to where it gets in and fixing that. We start with the damp patch inside, then look at the chimney, flashings, gutters and roof covering using the drone and a loft inspection. Once the fault is put right, the wall dries out, and any plastering or redecorating can be done after that.

How long does damp proofing take?

Clearing a gutter or resealing a joint can take a day. Chimney repairs on a Barton period house usually need scaffolding and take longer, and if the house is in the conservation area, check first whether any change needs consent. The wall then takes weeks to dry, so allow for that before redecorating.
Get In Touch

Can’t find the answer you’re looking for?

Get in touch with the team today.

Call NowGet Your Quote