Especially Roofing
Damp Proofing by Especially Roofing
5 Star Rated on Checkatrade

Damp Proofing in Grimsby

Stop damp at its source, whether that is a chimney stack, a flashing, a gutter or a slipped slate.

  • Chimneys and flashings
  • Gutters and slipped slates
  • Honest about the cause

Get a quote for damp proofing in Grimsby

Fill out the form below, and we will get back to you swiftly.

Step 1 of 2

Damp Proofing in Grimsby

Damp on an upper wall usually starts somewhere above it

Painting over a damp patch only hides it for a while. If water is getting in through a cracked flashing, crumbling flaunching on a chimney, an overflowing gutter or a slipped tile, the stain will come back until that defect is put right. Finding the real entry point is the part that matters, and as roofers that is where we begin, on the roof and in the loft, rather than with the plaster.

We look at where the damp sits indoors and when it appears, then inspect the stack, flashings, valleys and guttering above it, using the drone and a look in the loft. Once the cause is found, the repair goes on your written quote. We also carry out general damp proofing, and if a problem has a cause we cannot fix, we tell you that plainly instead of selling a treatment that will not help.

Damp Proofing project completed by Especially Roofing
Grimsby

Damp in Grimsby's solid-walled terraces

Grimsby's Victorian terraces were typically built with solid brick walls, so when rain reaches the outside face there is no cavity to stop it working through to the plaster. Chimney stacks are a frequent culprit on these houses: the flaunching around the pots cracks, the lead where the stack meets the slope lifts, and wind-driven rain off the estuary does the rest. Damp beside a chimney breast upstairs very often starts up there.

The back of a terrace has its own weak spots. Where the rear outrigger roof meets the main house, a tired flashing or a blocked valley can let water into the wall of a back bedroom or the room below. On twentieth-century houses around Grimsby, the causes tend to be different, such as a leaking gutter joint or a slipped tile. In each case we trace the water first, then repair whatever is letting it in.

What your damp proofing quote covers

  • Drone inspection of roof, stack and roofline
  • Loft check for staining and wet timber
  • Tracing the likely route of the water
  • Flashing, flaunching and chimney repairs
  • Guttering and downpipe repairs or clearing
  • General damp proofing work where suitable
Drone view over a row of finished roofs on a Hull street
Especially Roofing inspection drone beside pallets of new roof tiles
Grey tiled hipped roof seen from above after replacement
Free Drone Inspections

See your roof from above before you decide

Most roof problems cannot be seen from the garden. Our drone survey gives you clear pictures of the tiles, ridge, valleys, chimney and guttering, so you can see the damage we are talking about and understand why the work is needed.

It is free and there is no obligation. If the roof is sound, we will tell you so. If it needs work, the images sit alongside your written quote, and they are useful if you are making an insurance claim for storm damage.

How It Works

How your damp proofing job runs, step by step

Why Choose Us

Why choose Especially Roofing for damp proofing in Grimsby?

Rated 10/10 on Checkatrade

What our customers say

Reviews from homeowners and businesses we have worked for around Hull.

FAQs

Damp proofing in Grimsby: your questions

Why is there damp around the chimney breast in my Grimsby house?

Damp beside or above a chimney breast is often caused by the stack itself. The flaunching on top can crack, the lead flashing where the stack meets the roof can lift or split, and an exposed stack takes the brunt of wind-driven rain. We inspect the stack closely with the drone and from the loft, then repair the part that is letting water in.

Can damp in my terrace come from next door's roof or chimney?

It can. On a terrace, stacks and roof junctions are often shared or sit right on the party wall, so water getting in on one side can show up on the other. We look at the whole area around the damp, not only your half, and tell you what we find, so you can talk to your neighbour if the repair involves their side.

Is the damp in my back bedroom coming from the outrigger roof?

Possibly. The junction between the outrigger roof and the main wall, along with any valley there, is a common entry point for water on terraced houses. A blocked gutter on the outrigger can also soak the wall. We check those points first, and if the damp turns out to have a different cause, we tell you what we think it is.

Do you also handle damp that is not caused by the roof?

We take on general damp proofing as well as roof and roofline causes. Some damp has more than one source, so we explain what we can see and what we cannot. If the cause sits outside the work we can put right, we say so plainly rather than recommend a treatment that will not deal with it.

How much does damp proofing cost?

It depends on the cause and where it is. On a Grimsby terrace, damp in a back bedroom may trace to the outrigger roof or the junction with the main roof, while a shared chimney stack needs scaffolding and some agreement with next door. Gutter repairs are usually smaller. Every cause found is priced separately on the written quote.

What is damp proofing?

It is the work that keeps moisture out of a building. Damp is usually penetrating, from rain getting in; rising, from moisture in the ground; or condensation from inside. Grimsby's Victorian and Edwardian terraces have solid brick walls, chimney stacks and outriggers, so rain finding its way in from above is often the cause, and that is where we start looking.

How long does damp proofing last?

Fixing the cause should keep that damp away for as long as the repair holds. New flashings, flaunching and guttering last a long time with occasional checks, though a town exposed to wind off the estuary and the sea is harder on them than a sheltered one. Any guarantee that applies is confirmed on your written quote.

How does damp proofing work?

It works by tracing the damp back to the point where water gets in, then repairing it. In a Grimsby terrace that can mean following a stain in a back room to the outrigger roof, a chimney or a gutter. We use the drone and a loft check, fix the defect, and then the wall can dry out before any making good.

How long does damp proofing take?

Gutter and short flashing repairs can be done in a day. Chimney stacks on Grimsby terraces usually need scaffolding and sometimes access agreed with neighbours, so they take longer, and wind off the estuary can affect timing. Allow weeks after the repair for the wall to dry before replastering.
Get In Touch

Can’t find the answer you’re looking for?

Get in touch with the team today.

Call NowGet Your Quote