Especially Roofing
Damp Proofing by Especially Roofing
5 Star Rated on Checkatrade

Damp Proofing in Hessle

Trace the damp in your Hessle home back to where water gets in, then put that cause right.

  • Causes traced by drone
  • Stacks, flashings, gutters
  • General damp proofing too

Get a quote for damp proofing in Hessle

Fill out the form below, and we will get back to you swiftly.

Step 1 of 2

Damp Proofing in Hessle

Stop the water first, then let the wall dry

Damp comes in three main kinds. Penetrating damp is water getting in from outside, often through a roof or roofline defect. Rising damp comes up from the ground through the walls. Condensation forms when moist indoor air meets a cold surface. Treating stained plaster without knowing which you have only brings the mark back, so the first job is working out where the water is coming from.

As roofers, we start at the top. The drone shows the chimney stack, flashings, flaunching, valleys and guttering close up, and a look in the loft for staining and wet timber narrows down the route the water is taking. The cause is then repaired. We also take on general damp proofing work, and where a cause sits outside what we fix, we tell you plainly.

Damp Proofing project completed by Especially Roofing
Hessle

Where damp tends to start in Hessle homes

In the older terraces and Victorian houses near the centre of Hessle, chimney stacks are a frequent source of damp. Lead flashings split or pull out of their joints, the mortar flaunching on top of the stack cracks, and water runs down inside the brickwork to show up on a chimney breast or bedroom ceiling. Slipped slates on the main roof can also let rain onto the timbers, where it travels before appearing below.

On interwar and post-war semis and newer homes, damp on an upper wall often sits right below a leaking gutter joint or a downpipe that has come apart, soaking the brickwork from outside. Wind-driven rain off the estuary can make that worse by pushing water against walls already wetted by a faulty gutter. Fixing the gutter or flashing comes first; the wall then needs weeks to dry before any redecorating.

What your damp proofing quote covers

  • Drone inspection of roof, stack and roofline
  • Loft check for staining and wet timber
  • Tracing the likely route of the water
  • Flashing, flaunching and chimney repairs
  • Guttering and downpipe repairs or clearing
  • General damp proofing work where suitable
Drone view over a row of finished roofs on a Hull street
Especially Roofing inspection drone beside pallets of new roof tiles
Grey tiled hipped roof seen from above after replacement
Free Drone Inspections

See your roof from above before you decide

Most roof problems cannot be seen from the garden. Our drone survey gives you clear pictures of the tiles, ridge, valleys, chimney and guttering, so you can see the damage we are talking about and understand why the work is needed.

It is free and there is no obligation. If the roof is sound, we will tell you so. If it needs work, the images sit alongside your written quote, and they are useful if you are making an insurance claim for storm damage.

How It Works

How your damp proofing job runs, step by step

Why Choose Us

Why choose Especially Roofing for damp proofing in Hessle?

Rated 10/10 on Checkatrade

What our customers say

Reviews from homeowners and businesses we have worked for around Hull.

FAQs

Damp proofing in Hessle: your questions

Why is there a damp patch beside my chimney breast?

Damp beside or above a chimney breast is often caused by water getting in at the stack. Split or lifted lead flashing, cracked flaunching on top, or porous brickwork can all let rain run down inside. On older Hessle houses the stack is usually the first place to check. The drone shows it close up, and the loft check confirms where the water is reaching the timbers.

Can damp be caused by my guttering?

Yes, and it is more common than many people expect. A leaking joint or a downpipe that has come apart pours water onto the same patch of brickwork every time it rains, and that wall can stay wet enough for damp to show on the plaster inside. Clearing or repairing the guttering stops the source, and the wall then needs time to dry out.

What if the damp is low down on a ground floor wall?

Damp low on a ground floor wall usually has a different cause from damp near the ceiling, often rising damp or condensation rather than a roof defect. We take on general damp proofing work and will look at what we can see, but if the cause sits outside what we fix, we say so plainly instead of offering work that would not help.

Could the damp in my bedroom be condensation?

It could. Condensation tends to show as black mould on cold corners, window reveals and outside walls, and it is often worse in winter when windows stay shut. Penetrating damp from the roof usually appears as a tide-marked stain that worsens after rain. Checking the roof, stack and gutters by drone helps rule a roof cause in or out before anything else is done.

How much does damp proofing cost?

It depends almost entirely on the cause. Clearing a blocked gutter or resealing a joint is a modest job, while new chimney flashings, fresh flaunching or stack repairs on a taller Hessle house usually need scaffolding and more materials. If there is more than one cause, each one is listed. The drone inspection comes first, then a free, itemised written quote for putting it right.

What is damp proofing?

Damp proofing means stopping water getting into a building's walls and ceilings, or building up inside them. There are three main kinds of damp: penetrating damp from outside, rising damp from the ground, and condensation from moist indoor air. Our part starts with tracing and fixing roof and roofline causes, such as flashings, flaunching, stacks, gutters and slipped tiles, and we also take on general damp proofing work.

How long does damp proofing last?

A repair to the cause lasts as long as the part that was fixed stays sound. New lead flashing, renewed flaunching or a resealed gutter should keep water out for a long time if it is looked after, but a new fault elsewhere can bring damp back. Checking your gutters and roof now and then, particularly after a storm, is the best way to keep a dry wall dry.

How does damp proofing work?

For damp caused by the roof or roofline, it works by finding where the water gets in and stopping it there. The drone and a loft check trace the route, then the flashing, flaunching, stack, gutter or roof covering at fault is repaired. With the source closed off, the wall can start to dry. Treating the plaster alone, without that step, tends to fail.

How long does damp proofing take?

Many roof-related causes, such as a blocked gutter or a short run of flashing, can be fixed in a day. Chimney work that needs scaffolding takes longer. The bigger wait is drying: once the water stops, a wall or ceiling can take weeks to dry out, depending on the weather and how wet it got. Redecorating is best left until then.
Get In Touch

Can’t find the answer you’re looking for?

Get in touch with the team today.

Call NowGet Your Quote