Especially Roofing
Damp Proofing by Especially Roofing
5 Star Rated on Checkatrade

Damp Proofing in Beverley

Stop damp at the point where water gets in, rather than painting over the stain it leaves behind.

  • Chimneys and flashings
  • Gutters and slipped tiles
  • General damp proofing

Get a quote for damp proofing in Beverley

Fill out the form below, and we will get back to you swiftly.

Step 1 of 2

Damp Proofing in Beverley

The stain on your ceiling is where water ends up, not where it starts

Water rarely shows up directly below the fault that lets it in. It can run along a rafter, down the inside of a chimney stack or through wet brickwork before it marks a ceiling or upper wall. That is why replastering on its own so often fails: the source is still there. You get the cause found first, whether that is a flashing, the flaunching around the pots, a leaking gutter or a slipped tile.

We start with a free drone inspection of the stack, flashings, valleys and gutters, then look in the loft for staining and wet timber. Once the source is clear, we repair it. We also take on general damp proofing. Some damp has more than one cause, and some sits outside what we can fix; when that is the case, we say so plainly instead of selling you a treatment that will not work.

Damp Proofing project completed by Especially Roofing
Beverley

Tracing damp in Beverley's period houses

Georgian and Victorian houses in Beverley's historic centre often have chimney stacks, and a stack is open to the weather on every side. Mortar joints wash out, the flaunching around the pots cracks, and the lead where the stack meets the roof lifts or splits. Any one of these can let water track down inside the brickwork and appear as a damp patch on a chimney breast, sometimes a floor or more below the fault itself.

Houses of that age also tend to have solid brick walls, with no cavity to stop water crossing from outside to in, so a leaking gutter joint or a split downpipe can soak straight through. On the newer estates around Beverley, damp near the roof is more often down to a slipped tile, a failed valley or condensation in the loft. Where the cause is a roof or roofline defect, we fix it; where it is not, we tell you.

What your damp proofing quote covers

  • Drone inspection of roof, stack and roofline
  • Loft check for staining and wet timber
  • Tracing the likely route of the water
  • Flashing, flaunching and chimney repairs
  • Guttering and downpipe repairs or clearing
  • General damp proofing work where suitable
Drone view over a row of finished roofs on a Hull street
Especially Roofing inspection drone beside pallets of new roof tiles
Grey tiled hipped roof seen from above after replacement
Free Drone Inspections

See your roof from above before you decide

Most roof problems cannot be seen from the garden. Our drone survey gives you clear pictures of the tiles, ridge, valleys, chimney and guttering, so you can see the damage we are talking about and understand why the work is needed.

It is free and there is no obligation. If the roof is sound, we will tell you so. If it needs work, the images sit alongside your written quote, and they are useful if you are making an insurance claim for storm damage.

How It Works

How your damp proofing job runs, step by step

Why Choose Us

Why choose Especially Roofing for damp proofing in Beverley?

Rated 10/10 on Checkatrade

What our customers say

Reviews from homeowners and businesses we have worked for around Hull.

FAQs

Damp proofing in Beverley: your questions

Is the damp on my chimney breast coming from the roof?

Quite often it is. Damp on a chimney breast, especially on an upper floor and worse after rain, usually points to failed lead flashing, cracked flaunching or porous brickwork on the stack. The drone gives us a close view of all three without scaffolding. If the stack looks sound, we look at other causes and tell you what we think they are.

Can you repair a chimney stack in one of Beverley's conservation areas?

Yes. Repointing, new flaunching and new lead flashing are repairs we carry out on stacks of every age. Changing a roof's features in a conservation area can need consent from East Riding of Yorkshire Council, so if a repair would alter the stack, such as taking it down, we will raise that with you so you can check before the work is booked.

Do you deal with damp that is not coming from the roof?

We take on general damp proofing as well as roof and roofline causes. Some damp has more than one source working together, so we tell you what we can see and what we cannot. If the cause sits outside what we can put right, we will say so rather than sell you a treatment that will not stop it.

How long will the damp patch take to dry out?

That depends on how wet the wall got and the weather afterwards. Once the water stops getting in, a ceiling or a solid brick wall can take weeks to dry, and longer through a cold, wet spell. It is worth waiting until it has dried before replastering or redecorating, otherwise the new finish can stain or blister.

How much does damp proofing cost?

It depends almost entirely on the cause. Clearing a blocked gutter is a modest job, while new lead flashings or repairs to a chimney stack on a tall period house in Beverley usually need scaffolding and cost more. If damp has two sources, each is priced on the quote. Replastering inside is separate and only worth doing once the wall has dried.

What is damp proofing?

Damp proofing covers the work that stops moisture getting into a building. Damp is broadly one of three kinds: penetrating damp, where rain gets in from outside; rising damp, where moisture comes up from the ground; and condensation from inside the house. On Beverley's Georgian and Victorian houses, with their chimney stacks and solid walls, penetrating damp from the roof and roofline is a common culprit, and that is where we start.

How long does damp proofing last?

That depends on what was done. When the cause is a failed flashing, a cracked chimney stack or a leaking gutter, the fix lasts as long as the new leadwork, mortar or guttering, provided it is looked after. Any guarantee that applies to our repair is confirmed on your written quote, so you know before agreeing to the work how long it is covered for.

How does damp proofing work?

First the source has to be found, because treating a wall without stopping the water only brings the stain back. We look at the damp from inside, then follow it back to the chimney, flashings, gutters or roof using the drone and a loft check. Once the defect is repaired, water stops reaching the wall, and the plaster can dry out before any making good.

How long does damp proofing take?

The repair itself is often quick. Clearing a gutter or renewing a short length of flashing can be done in a day, while chimney work on a period house in Beverley may need scaffolding and take longer. The wall then needs time to dry, which can run to weeks depending on the weather and how wet it got, so redecorating comes last.
Get In Touch

Can’t find the answer you’re looking for?

Get in touch with the team today.

Call NowGet Your Quote